Jump to content

Copying timing from old seq to new seq


Recommended Posts

open both sequences

Right click in first square

select "Select Row"

select "Copy Timing"

open second sequence

right click any where

select "Insert Timing at"

Type "0:00.00"

Press enter

Link to post
Share on other sites

let see if this may help. maybe your going from 32 to 96 channels.

 open old sequence. on first line item,- right click,  click insert channel, click insert multiple channels above.   select desired number. click ok.  click edit, click import/export. click import. now you'll have the new channels and the old on one sheet, new on top. old on bottom. . timing is all the same. now you can select row at the bottom half to copy and move to the new location on top.

 

When your all done. remove the bottom half. there will be a conflict of controller unit and the same channels if you don't.

 

It also work well if you trying to use someone else's sequence to get the timing marks.  

Link to post
Share on other sites

I have added DMX channels to the new seq. 

I created a new timing freeform grid,in the new seq. with no timing. Then I copied the old to the new freeform gird.

Thanks.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...