Brad Ford Posted November 16, 2013 Share Posted November 16, 2013 Hey guys I got a new one on me. One of my controllers was working fine then all of a sudden the whole left bank of channels quit working. Checked fuses and made sure had power to both sides (two seperate 15 amp circuits) and still channels 1 through 8 do not work....any ideas or suggestions? Link to comment Share on other sites More sharing options...
Ken Benedict Posted November 16, 2013 Share Posted November 16, 2013 What changed? Any power cords moved around, maybe? Did you look around inside the controller to see if any wires came loose? Link to comment Share on other sites More sharing options...
Max-Paul Posted November 16, 2013 Share Posted November 16, 2013 Both banks have there own chip. Wonder if you had one of those chips blow out. Is this a kit? Even if it is not, there is a chance that a bad solder joint might have given away. This is the large chip below and either left or right of the brains chip that is below the RJ-45 sockets. Although it might be something else, this comes to my mind as a first thing to look at. Link to comment Share on other sites More sharing options...
Recommended Posts