SS and CCB

[disneyangela]

I am just starting with my CCB is the SS.  It seems to want to default to the ribbons when I have the bulbs.  Any suggestions?  Where do I find the ting to click for the bulbs and not ribbon.

 

Thanks bunches. 

[BrianBruderer]

CCBs can be sequenced identical to the way CCRs are sequenced. So there is no CCB setting in SuperStar. Also, if you want to do CCBs in the Light-O-Rama visualizer, you pretend they are CCRs. 

 

For CCBs to be treated as CCRs you must configure them as "Dual Normal" using the Hardware Utility. Once you do that, each of the two strings connected to the CCB controller will be assigned it's own unit Id. For example, if you set "Dual Normal" and assign the controller unit Id 03, then the first string connected to the CCB controller will be unit Id 03 and the second string connected to the CCB controller will be automatically assigned unit Id 04. In this way each string can be sequence identical to the way you sequence CCRs because each CCB string is 50 pixels and a CCR ribbon is 50 pixels as well.

[Ron Boyd]

If you want the visualization to look like bulbs, you have to draw it out in the visualizer and import it into SS

[disneyangela]

Are there 50 "bulbs" in the CCR as well? You know to get an individual bulb look?

[BrianBruderer]

As Ron Boyd posted, if you want the "Bulb" look you will need to make a visualization in the Visualizer and then import it into SuperStar. In the Visualizer you can also set the size of the bulbs.