Jump to content

Cublock and LOR?


Recommended Posts

  • 2 weeks later...

Can't See it happening, as the CUBLOC is an RS232 device, AND, it has it's own EEPROM (4k).


I guess you could get a 485 back down to rs232 interface (somewhat backwards) , THEN you would have to get 96 channels of optocouplers AND triacs, AND enough AC power to drive it all.


IMO walk away, unless you have a ton of cash and lots of time (and much hair, because you will be bald sooner than you should be.....



Link to comment
Share on other sites

  • Don locked this topic
This topic is now closed to further replies.

  • Create New...