butlerlj Posted July 2, 2013 Share Posted July 2, 2013 I can get my DMX to work without the LOR controller and I can get my LOR to work without the DMX controller but I can't get them to work together. I noticed I can't keep the control lights to stay check marked in play menu whe trying to play both. I am using the LOR USB485 to talk to the lor controller and the enttec open to talk to the dmx controller. Can i run this type of setup? Any help would be appreciated. ljb Link to comment Share on other sites More sharing options...
Jack Stevens Posted July 2, 2013 Share Posted July 2, 2013 What are your network preferences set to? (Edit -> Preferences -> Network Preferences) Does that see both dongles? Link to comment Share on other sites More sharing options...
butlerlj Posted July 2, 2013 Author Share Posted July 2, 2013 I have attached a photo of my network setting for the LOR and DMX tabs.i had DMX in unverse 1 but moved it to universe 2 to see if it made a difference Link to comment Share on other sites More sharing options...
Jack Stevens Posted July 2, 2013 Share Posted July 2, 2013 Unfortunately, my show computer is down waiting for me to replace a failed CPU fan; just got that in yesterday. That looks good to me; does the listener get upset if you unplug either dongle? It should scroll error messages to your screen. If not, it may be a driver issue. Link to comment Share on other sites More sharing options...
Recommended Posts