Jump to content
Light-O-Rama Forums

Mounting RGB onto (or around) Vinyl windows & Stucco


Recommended Posts

Posted

My house has stucco exterior and vinyl windows, where the window edges are flush with the stucco...

any Ideas for the best way to mount some RGB strips on/around the windows.

What is the best way to attach them to the house)

Photos would be a HUGE Help

Thanks

Posted

I built PVC frames for the windows and attached the lights to the PVC. From there I used the 3M hooks that have the clean remove tape on the back onto the house. Then a ziptie around the PVC and around the hook. Next week there will be 0 evidence there were even lights on the house at all.

Posted

So the 3M hooks tape onto the vinyl and hold the weight of the PVC pipe ok?

Posted

Did it last year too and no issues. Its all about prep. Make sure you remove dirt and dust, then press and hold like it says for the 1 minute. We have had rain, heat, cold enough to ice and no issues.

Guest Don Gillespie
Posted

I guess it depends where you live, that 3M stuff doesn't work in the real cold, (people that say it gets cold in Florida should come and stay with me for a few days) tell us where you live it could be helpful when you are asking for advice.

Posted

I guess it depends where you live, that 3M stuff doesn't work in the real cold, (people that say it gets cold in Florida should come and stay with me for a few days) tell us where you live it could be helpful when you are asking for advice.

It gets cold, but nothing like the north, Ive had a fwe nights of 30's but thats it. The temps you guys get are actual cold.

Guest
This topic is now closed to further replies.
×
×
  • Create New...