mattpatt Posted December 23, 2012 Share Posted December 23, 2012 Noticed this last night. One of my snowflakes are stuck at like 50%. I can tell because it will go to full intensity when it is supposed to light up but then go back to 50% when it is supposed to be off. In between sequences the snowflake never goes off. I've tried a different set of lights. No difference. I tried power cycling the controller. This fixed it for like one sequence then it started doing it again. I have also reseated cables. Anyone have any ideas? Thanks,Matt Link to comment Share on other sites More sharing options...
Max-Paul Posted December 24, 2012 Share Posted December 24, 2012 (edited) [said to the tune of "The Christmas Song] It's been said, many times, many ways. Your Triac is broken. [/] Edited December 24, 2012 by Max-Paul Link to comment Share on other sites More sharing options...
Jerry Posted January 19, 2013 Share Posted January 19, 2013 Noticed this last night. One of my snowflakes are stuck at like 50%. I can tell because it will go to full intensity when it is supposed to light up but then go back to 50% when it is supposed to be off. In between sequences the snowflake never goes off. I've tried a different set of lights. No difference. I tried power cycling the controller. This fixed it for like one sequence then it started doing it again. I have also reseated cables. Anyone have any ideas?Thanks,MattHey Matt, just wondering if you ever got your problem resolved. I have a controller doing the exact same thing. I contacted the "Help Desk" and didn't get much help. Thanks ! Link to comment Share on other sites More sharing options...
Recommended Posts