jim st john Posted December 18, 2012 Share Posted December 18, 2012 Well, I've finally gotten around to trying the E1.31 output of LOR, and I'm obviously doing something wrong because I can't make it work. I went into network preferences and defined DMX universe 8 as E1.31, multicast. I took an existing sequence and changed the channels that I use for Madrix remote control from type standard LOR device (I had been using an idmx1000) to type DMX universe 8.When I play the sequence, I don't see any E1.31 being output on universe 8, either using Sacnview or Wireshark. Obviously I'm missing something. I do have an RS485 output dongle that I use to drive the LOR controllers. Link to comment Share on other sites More sharing options...
WilliamS Posted December 18, 2012 Share Posted December 18, 2012 What kind of controller are you sending the 1.31 signal to? Did you restart the LOR software? Link to comment Share on other sites More sharing options...
jim st john Posted December 18, 2012 Author Share Posted December 18, 2012 I'm trying to send E1.31 to Madrix for remote control. I exited and restarted the sequencer, and that's all I've tried so far is using the sequencer to play. Link to comment Share on other sites More sharing options...
Tim Fischer Posted December 18, 2012 Share Posted December 18, 2012 Do you have an advanced license? (I'm assuming these options don't even show up unless you do, but since I've never had a non-advanced license, I thought I'd ask...) Second question: Do you have the LOR control panel running? The "light bulb" must be visible in the system tray for either native DMX or E1.31 to work, even with the Sequence Editor. Also, "Control Lights" must be checked in the Play menu. Link to comment Share on other sites More sharing options...
-klb- Posted December 18, 2012 Share Posted December 18, 2012 Do you have an advanced license? (I'm assuming these options don't even show up unless you do, but since I've never had a non-advanced license, I thought I'd ask...)Second question: Do you have the LOR control panel running? The "light bulb" must be visible in the system tray for either native DMX or E1.31 to work, even with the Sequence Editor. Also, "Control Lights" must be checked in the Play menu.+1 I went through the fun of geting LOR to drive Madrix the day our show went live. Had a little "fun" even though I had previously driven an E681 from LOR... Link to comment Share on other sites More sharing options...
Shubb Posted December 18, 2012 Share Posted December 18, 2012 After you change the network settings you need to close and restart LOR and Control Panel. Link to comment Share on other sites More sharing options...
jim st john Posted December 19, 2012 Author Share Posted December 19, 2012 I think closing and reopening everything did it, thanks! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now