aceooooooooo Posted December 7, 2012 Posted December 7, 2012 Has anyone used or tried to use dream color lights for ccr's. Of course you would have to do a lil modding and use a CCR controller. http://item.mobileweb.ebay.com/viewitem?itemId=300741447266&index=6&nav=SEARCH&nid=75740037794 you can check them out here. Also you can look them up on you tube to see them working. Looking for a cheaper route.
Ken Benedict Posted December 7, 2012 Posted December 7, 2012 Many people are using these: http://www.aliexpress.com/store/product/5m-led-digital-strip-DC12V-input-WS2811IC-256-scale-10pcs-IC-and-30pcs-5050-SMD-RGB/701799_568458133.html$32 per string.There's a DMX controller that attached to it and the E682 from www.sandevices.com
aceooooooooo Posted December 7, 2012 Author Posted December 7, 2012 Thank you for your help, I like the sites
eldoradoboy Posted December 8, 2012 Posted December 8, 2012 I use the Sandevices E682 controllers..2 of them.. Sandevices sells them in a turnkey form titled the PS1 (pixel system 1), that has a power supply, the board, connectors and such all in a weather-proof case.... you just specify which voltage power supply you want.. (those strips are 12 volt)when you buy from Ray wu site you can have him install the proper connectors on the ends of your Pixels or LED strips so that they will connect directly to the E682 controller.Sandevices also sells 8 foot extension cables that you can use as well.. with 12 volts you may be able to get longer ones....LOR S3 Advanced supports E1.31 DMX .. which is DMX over standard ethernet. (E682 uses this type of comms)-Christopher
Caleb Linburg Posted December 8, 2012 Posted December 8, 2012 Are the strips/their controllers programmable to diffrent channels. If they are how many DMX channels do they take up. How many can fit on one universe?
Recommended Posts