joefrick Posted December 6, 2012 Posted December 6, 2012 i had three triacs go bad this week. how do i re-map to a empty channels without re-doing all my sequences or channel configuration. i will fix them at the end of the lighting season, but for now i just want a temporary fix. thanks.
Galen Posted December 6, 2012 Posted December 6, 2012 I think I would open one of your sequences, go to the channel configuration and change the three channels to the unit and circuit that are good (you wish to use). Under Edit, export the channel configuration (give it a different name). Then, in all your other sequences that you are using in your show, simply open them in the sequence editor, import your new channel configuration, and save. I think this does it. There may be an easier way, without having to import the channel configuration into all of your sequences, but I'm not aware of that.
Galen Posted December 6, 2012 Posted December 6, 2012 Forgot to wrap it up . . . Of course then you need to make sure those three 'fixtures' are attached to your new unit/circuit appropriately.
Max-Paul Posted December 6, 2012 Posted December 6, 2012 Agree, Galen's way is as close as your going to get to the magic pill.
George Simmons Posted December 7, 2012 Posted December 7, 2012 Make sure the structure of your sequences - meaning the channel list - is identical in all sequences before importing a configuration.
Recommended Posts