sysco Posted December 3, 2012 Posted December 3, 2012 (edited) This is the first time for us using the USB adapters. We have used the USB adapter and installed the drivers from the disk and the website for Windows7 after looking under device manager etc the port is showing the proper com (5) but the boxes outside continue to blink. Only one box is showing solid out of 8. We had 6 working then all of a sudden we were put down to only one working. We switched out the USB adapters..changed a box outside but still nothing is working. Please help!!!! Edited December 3, 2012 by sysco
LOR Staff Posted December 3, 2012 Posted December 3, 2012 Cables. Check those cables.Run a known good cable to the first controller, and keep linking from there until you find the bad one.
Recommended Posts