Craig Heckman Posted November 25, 2012 Share Posted November 25, 2012 I have read many posts but still can't find the problem. I have 5 LOR1602 controllers. 4 are new and have the digital screen, but 1 is from 3 years ago and is not digital. My hardware utility can find the 4 digital, but not the older one. The first two in my show are digital, then the older one is in the 3rd spot, then two more digital controllers after that. The red light blinks when I turn it on, then goes solid red when connected, like it should. The fuses look good. Already put in a ticket for help, but looking for others opinions. Thanks for your time! Link to comment Share on other sites More sharing options...
Guest wbottomley Posted November 26, 2012 Share Posted November 26, 2012 It sounds like it has the same unit ID as one of the other controllers. If so, it will have to be connected separately to adjust. Link to comment Share on other sites More sharing options...
Recommended Posts