mmais68569 Posted November 23, 2012 Share Posted November 23, 2012 This yer I expanded to 16 controllers but the 16th will not run. I a license that is advanced in LOR 3, set controllers 1-9 as 1-9, set 10-15 as OA- OF then set 16 as 10 which it should have been but did not work. I then reset 16 to 16 to see if that would work but no good.What do I need to do to get the last controller working? Thanks Mike Link to comment Share on other sites More sharing options...
Dale W Posted November 24, 2012 Share Posted November 24, 2012 Isolate the controller and test it in the Hardware mode. If it works, you might have a bad cable. Link to comment Share on other sites More sharing options...
mmais68569 Posted November 24, 2012 Author Share Posted November 24, 2012 It tests perfect & I have changed cables & also tried it wireless with no results. It has to be something with the controller number but can not figure it out. Mike Link to comment Share on other sites More sharing options...
Jeff Messer Posted November 24, 2012 Share Posted November 24, 2012 Maybe Port out of controller OF is bad and not the cable.Not sure how you have them wired but if OF has a bad jack I would put that controller at the end of the network.Jeff Link to comment Share on other sites More sharing options...
Recommended Posts