FischLights Posted November 22, 2012 Share Posted November 22, 2012 ok so I was playing around with the servodog last night, i don't know what it even is I updated the id on servo dog and now I can only find 1 controller on hardware unit id's, and it's named weirdWhat did I mess up in servo dog to do this. I'm lost and NEED help. show is suppose to start tonight!! Link to comment Share on other sites More sharing options...
ItsMeBobO Posted November 22, 2012 Share Posted November 22, 2012 you may have changed all of your unit ids to the same one. You need to go to the first unit in your daisy chain.. the first one after the adapter and unplug the ones which follow. In Hardware utility refresh and change the unit back to what it should be. Then plug in one and only one more unit. You didnt say how many you have. Add one at a time, refresh and change unit id. This may not work if they were all set to a unit id of one your controllers. In that case you need to have one and only one at a time until you get them all set back again. Link to comment Share on other sites More sharing options...
Recommended Posts