RaceMedic Posted November 19, 2012 Share Posted November 19, 2012 Hello ...Did my first test tonigt on my show and wow the CCRs are BRIGHT. In the hardware you can set the overall intensity of a controller. Can the overall intensity be reduced on a CCR ?Thanks Dave Link to comment Share on other sites More sharing options...
RaceMedic Posted November 19, 2012 Author Share Posted November 19, 2012 To clarify ... What I mean .. rather than going back into each sequence and setting the intensity.Can it be done for everything !? Link to comment Share on other sites More sharing options...
ainsworth Posted November 19, 2012 Share Posted November 19, 2012 I don't know of a way to set the maximum intensity for a CCD controller. Using the foreground effects tool will make updating your sequences a little less painful. Set the intensity you want, turn on the foreground effects tool, highlight the entire CCR section of your sequence and the intensity of all the timings that have an on event will be set to your new setting. At least your work will be reduced to 1 change per sequence. Link to comment Share on other sites More sharing options...
Frank Farmer Posted November 19, 2012 Share Posted November 19, 2012 RaceMedic,I know what you mean. When I first fired up my CCR tree in my garage, I had to have sunglasses to look at it. Once it got outside, it wasn't as bad. Still the brightest display of all my light elements, I didn't have to dim it. Link to comment Share on other sites More sharing options...
David Rise Posted November 19, 2012 Share Posted November 19, 2012 I know you can do it in Superstar. I set mine at 70% so it won't overwhelm the rest of the display. Link to comment Share on other sites More sharing options...
RaceMedic Posted November 19, 2012 Author Share Posted November 19, 2012 I know you can do it in Superstar. I set mine at 70% so it won't overwhelm the rest of the display.Can you elaborate more Dave ?! Link to comment Share on other sites More sharing options...
Recommended Posts