Boucne house effect lights

[Torqumada286]

I've managed to sequence the effect properly, but am having problems with the physical build. I've got lights on the roof line in clips, but when I try to hang the icicle lights to the same clips, it throws everything off. How do you set your lights up to get the effect to work properly?

Torqumada

[ezimnow]

If I am not mistaken and you are talking about the icicle lights, what he did was add a second row of icicle lights to the first about 9" down. I connected 2 sets of icicle lights and hung the second set off the longest strand on the first.

I hope this makes some sense and helps.

[Torqumada286]

You're not using a line of lights on the roof combined with the icicle lights?

Torqumada

[ezimnow]

Yes, I also have a line of C-9's

[ezimnow]

I followed this post

http://forums.lightorama.com/index.php?/topic/15034-anybody-know-how-this-was-achieved/page__hl__%2Bbounce+%2Beffect

[Torqumada286]

What method are you using to hang your icicle lights?

Torqumada

[ezimnow]

Well I have mine on "J" channel...that I am going to hang off the gutters. I pre-measured those. Here is a picture of my house..for the Peak I am using Clips in the shingles....It should work out but this is my first year with Icicles so I can only hope...

http://s1067.beta.photobucket.com/user/ezimnow/media/22011Nov2011355.jpg.html?sort=3&o=4#/user/ezimnow/media/22011Nov2011355.jpg.html?sort=3&o=4&_suid=1352757674968007176601144631883

[Jerry]

What method are you using to hang your icicle lights?

Torqumada

You'll need to have a space between the large bulbs up on top of .your gutter and the icicle lights of at least 5 or 6 inches. They make a clip to snap onto the J channel that is below & behind your gutter. Found them at Lowes last year , but not this year . PM me with your email add. and I can send you a pic of the clips. Hope this helps.