Jump to content

Anyone else building a frame for a 12 ribbon CCR tree?


Recommended Posts

I have noticed that no one has ask what order the star and CCR,s go, So i PMed Frank and this was his reply:

Hi Larry,

Star channel #1 in the center star, 6th on the outside.

CCR channels are counted from left to right as you look at the tree.

Make sure you post pictures of your work, looking forward to see what you have done.

Frank

 

Again, Thank You Frank for all you do on this subject. our are the best.

Link to post
Share on other sites
  • Replies 254
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

I have had some bad experiences with the color ribbons breaking when being flexed, so I decided to build a frame for my CCR tree instead of connecting it to rope or flexible piping. I finished buildin

Finished product videos:   http://youtu.be/jS2ZKc1Pu0E   http://youtu.be/cxf0wKS2PNk   Click and watch from the youtube site, sometimes there is a delay when watching via the forum.

I've received several PM's for details, so I'll just put them here. Hope this helps. This is the measurements for the tree...

Posted Images

  • 2 weeks later...

Well i have been working on my CCR tree, i have the frame together, I can tell you 2 things, it's heavy, and don't try and stand it up by yourself.

Here are some pictures:

http://s113.photobucket.com/user/LLeonha104/embed/slideshow/CCR%20Tree"></iframe>

Edited by Larry Leonhardt
  • Like 1
Link to post
Share on other sites
  • 4 weeks later...

Looking for a good place to purchase the Aluminum to build this frame, it seems as though the price of Aluminum has shot up the last few months, I've searched online and I cant find anyone who can get the pricing you guys are getting it for out here in Southern Ca. Any Suggestions?

Edited by godman
Link to post
Share on other sites

Looking for a good place to purchase the Aluminum to build this frame, it seems as though the price of Aluminum has shot up the last few months, I've searched online and I cant find anyone who can get the pricing you guys are getting it for out here in Southern Ca. Any Suggestions?

Have you checked at your local FAB shops? That where i got mine.

Link to post
Share on other sites

Thanks Larry,

I checked over a dozen places here locally and the best price I was able to get was 1.12 per ft, and free delivery, worked out to $26.88 per 24' piece and I could only get the tubing in 16' or 24' sections so I went with 18 24ft pieces. I'm doing a 16 tree frame. I'll be doing some cutting!

Anyone make this frame for a 16 CCR Tree? 

Link to post
Share on other sites

@ Larry, I was looking at your pics, Why the nut between the Brace and strips? Does it serve a purpose?

 

Thanks,

Link to post
Share on other sites

Well, today I have all the ccr's mounted to the tree, Tonight I will be running Yellow Snow sequence and try to take some pic's and video's. I do not have the star installed on the tree yet, It still needs the front attached.  

Link to post
Share on other sites

@ Larry, I was looking at your pics, Why the nut between the Brace and strips? Does it serve a purpose?

 

Thanks,

 

If you are talking about the bolts that hold the star in place, I'll bet I can answer that because I'm doing the same thing.  The nuts keeps the bolts attached to the star, so the star can be removed from the frame without having to take the star apart.  Unscrewing all 50 little screws that hold the front panel of the star on is a real pain when all you need to do is tighten the bolts holding the star in place.  In my case, the star is removed from the frame for off-season storage, and i did not initially have it set up this way.  Had to take the star apart (all 50 screws) to get the front cover off so I could bolt the star in place.  Not fun!

Link to post
Share on other sites

Anyone make this frame for a 16 CCR Tree? 

Yes, but a little different design, especially when it comes to the star attachment and attaching the legs to the star. In the past I've had trouble with a CCR developing problems with a few pixels or more. So bad that I needed to take down the CCR and replace it mid-season. I needed a simple way to remove the tree leg, remove the bad CCR, replace it and then put the single leg back in place without the need to take down the entire tree. And working up on a ladder at 16' wasn't an option for me, even though I did it a couple of years ago. The tree is a work in progress and I'll post more information as it moves along.

Link to post
Share on other sites

If you are talking about the bolts that hold the star in place, I'll bet I can answer that because I'm doing the same thing.  The nuts keeps the bolts attached to the star, so the star can be removed from the frame without having to take the star apart.  Unscrewing all 50 little screws that hold the front panel of the star on is a real pain when all you need to do is tighten the bolts holding the star in place.  In my case, the star is removed from the frame for off-season storage, and i did not initially have it set up this way.  Had to take the star apart (all 50 screws) to get the front cover off so I could bolt the star in place.  Not fun!

Yes, the regular nuts hold the reinforcement brackets to the star, then the wing nuts will hold the star to the tree, At Christmas time i might do away with the wing nuts and just use regular nuts. 

Link to post
Share on other sites

So the fun begins..........I'll need to alter Franks plans a bit cause I'm doing a 16 ribbon frame

post-11409-0-27404800-1431598786_thumb.j

Edited by godman
  • Like 1
Link to post
Share on other sites

I changed Frank plans also, I made it a little less wide at the bottom, I also changed how the star is attached, Instead of using the outer 2 uprights, I went in to the second and 11th uprights.

Link to post
Share on other sites
  • 4 weeks later...

I tried the 3/4 : PVC and it just didn't work, I finally found the 3/4 x 3/4 aluminum that Frank used and created basically the same frame except I went 16 strips. I also went with a 6-1/2 width at the bottom and it looks terrific, I can't imagine going 12-14" as some have done.... :o At 12" that would be 16ft in width, that's HUGE!!!!!! :blink::mellow:

Link to post
Share on other sites
  • 1 month later...

Larry,

Did you use LEDs on your star? I see some boxes in the picture, but not sure. Brian says he can build me a star, but his lights won't work with it. Spacing is off. How did you go about getting counts right?

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...