Jump to content

DYI kit


Guest guest
 Share

Recommended Posts

Guest guest

I just put two of these kits together and found it very easy, Dan at lor has a nice set of step by step instructions. I am sure anyone here would say the same.

Link to comment
Share on other sites

Guest guest

I Just put this kit together also. The board is already together, all you have to do is mount the board in the box, run wires (Provided in the kit) through the anchors in bottom of the box and push the connectors onto the board.
The instructions are very easy.
Only took about 30 to 40 minutes to put it together.
Tip:
I used the wifes label machine and labeled each plug with as "Channel 1, Channel 2 ,etc.
Then I labeled each black wire of coresponding plug with same channel number.
You will see why I did this as you put the kit together.
Al Terry

Link to comment
Share on other sites

Guest guest

Dan's kits are easy to do, good instructions, solder included, helpful on-line if you have troubles. Between my son and I we have about 8 kits to build this year - and I am looking forward to it.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...