CLD Kevin Posted September 3, 2012 Posted September 3, 2012 I received a few request looking for the CG-2000 enclosures so I went ahead and ordered some. Should be available by this Tues/Wed.http://www.store.creativelightingdisplays.com/Enclosures_c19.htmAlso, some new items added to the store…20A power supplies and LED strip connectors. I was also out-of-stock on the RGB Strips and RGB DC Controllers, but good now….so take a look around.Thanks,Kevin
scubado Posted September 4, 2012 Posted September 4, 2012 Which box works best with the PC cards? The CG 2000 looks too narrow. May I suggest what purpose each box is intended for on the website.
George Simmons Posted September 4, 2012 Posted September 4, 2012 I love using the CG 2000's for PC cards. The older PC cards just fit. (Occasionally, when LOR used slightly longer screws to attach the triac to the heatsink I had to lop off the last few threads of each screw.) The new Gen 3 cards are too wide, so they need to be turned sideways, but they fit just fine. I use either spt 1 or 2 for dongles. I've started cutting back the corners of the left heatsink to allow the wires to fit more comfortably and for the comm cables.
CLD Kevin Posted September 5, 2012 Author Posted September 5, 2012 The CG-2000 came in today are now available.And as GS stated...you can use for the PC or DC board...although I personally like the CG-1500 better for the DC board/PS.
scubado Posted September 5, 2012 Posted September 5, 2012 Doh! Didn't think to click on the links for more info!
Recommended Posts