Rogelio Posted August 28, 2012 Share Posted August 28, 2012 I have a CF2D CCF floodlight programmed in a standalone sequence. I understand this controller will act as a master controller for other connected devices. I cannot detect any DMX signal coming out of the CCF. How would this be programmed. My goal is to have the CCF control a string of other dmx lights I already have, all cycling thru the colors together. Do I need to turn on a dmx output? Do I need to program them as another address?ThanksRoy Link to comment Share on other sites More sharing options...
rwertz Posted August 29, 2012 Share Posted August 29, 2012 I don't think a LOR controller will output the DMX protocol. I think you are limited to the LOR protocol. If you wanted to spend the money you might be able to use an iDMX to convert it to DMX.Actually the iDMX description says "the iDMX1000 can act as a standalone director and it can be used to simultaneously control a LOR Network and/or a DMX Universe." Link to comment Share on other sites More sharing options...
Steven Posted September 8, 2012 Share Posted September 8, 2012 You can also buy an ELOR for less that half the cost of an IDMX1000, although it doesn't have a nice case. Link to comment Share on other sites More sharing options...
Recommended Posts