smeighan Posted August 10, 2012 Share Posted August 10, 2012 Some requests were for more simple effects. One was being able to just set the tree to a color.My version is the tree will cycle from your start color to your end color over the seq_duration.Here is Going from a blue and then going to a black.Effect Settingsusername fuser_target AAeffect_class color_washeffect_name COLOR_WASH1window_degrees 180start_color #0000FFend_color #000024frame_delay 100sparkles 0sparkle_count 0show_frame nseq_duration 9fade_in 0fade_out 0submit Submit Form to create your effectOBJECT_NAME color_washThe gif here is going too fast, if pasted it will show correctly (One more thing to debug)I wrote a different way of doing sparkles on this effect, they fade in and out. The speed they flash is adjustable also.Effect Settingsusername fuser_target AAeffect_class color_washeffect_name COLOR_WASH2window_degrees 180start_color #0000FFend_color #000024frame_delay 100sparkles 30sparkle_count 20show_frame nseq_duration 9fade_in 0fade_out 0submit Submit Form to create your effectOBJECT_NAME color_washFinally of the start and end color have a different hue, then i will blend them over the length for your seq_duration. I would keep the start and end colors darkened if you are using sparkles.Effect Settingsusername fuser_target AAeffect_class color_washeffect_name COLOR_WASH3window_degrees 180start_color #00008Fend_color #00400Bframe_delay 100sparkles 30sparkle_count 20show_frame nseq_duration 9fade_in 0fade_out 0submit Submit Form to create your effectOBJECT_NAME color_wash Link to comment Share on other sites More sharing options...
Recommended Posts