Connecting Dumb Rgb To Cmb16D-Qc

[digdeepfundraising]

evening/morning all i had a post saved on the old web site that had pictures on how to connect the dumb rgb to the cmd16d-qc and i can no longer find that post does anyone know the link or have the pictures im looking for

many thanks dan

[Tim Fischer]

Assuming common anode RGB (which most are), the common goes to a + terminal on the DC board (all are tied together on the board (per side anyway) so it doesn't matter which. Then use the - terminals for channels 1,2,3 (and so on ) for R, G, B.

Simple as that.

[digdeepfundraising]

perfect just what i needed to know i just built my 32 dc controller and i got to connecting the rgb and had major brain freeze cheers tim

[Santas Helper]

^{Hopefully this is what you were looking for.}

Edited July 11, 2012 by Santas Helper

[digdeepfundraising]

yep thats what i was looking for but tim explained it perfectly but cheers for the pics ive saved them for future reference

[Tim Fischer]

^{Hopefully this is what you were looking for.}

That's not a CMB16-QC but one of the cheap DMX controllers you can get from Ray.

[Santas Helper]

That's not a CMB16-QC but one of the cheap DMX controllers you can get from Ray.

Thanks for pointing that out Tim,

It was pics from the old LOR forum regarding a DC board and RGB light connection.

[dito]

is this what you were looking for?

http://forums.lightorama.com/index.php?/topic/19936-diagram-for-5050-rgb-led-setup/

[digdeepfundraising]

yes it was cheers dito

[Santas Helper]

yes it was cheers dito

And I dito the cheers