Jump to content
Light-O-Rama Forums

Lift And Separate


magish01

Recommended Posts

Okay,

So I split my 1 CCR so that it would be able to be used as 2 arches without damaging the ribbon. My question is.... does anyone have an idea of how much the two sections can be separated before you start to see degradation at the end of the ribbon. Turns out that with the two arches next to each other in my 4th show, my wife and a bunch of the neighbors wonder ...."why do you have two boobs in front of your flag?"

Need to move these apart.

Let the comments begin.

Photo can be seen at my site listed below.

Link to comment
Share on other sites

."why do you have two boobs in front of your flag?"

so besides you...who was standing in the yard next to the flag?? :rolleyes:

Edited by jimswinder
  • Like 1
Link to comment
Share on other sites

How far apart were you *wanting* to get them? I think you should be able to separate them a few yards at least, if you used thick enough gauge wire.

Link to comment
Share on other sites

Shubb,

For a baby, isn't it the same thing?

How far apart were you *wanting* to get them? I think you should be able to separate them a few yards at least, if you used thick enough gauge wire.

Was thinking about 3-4 feet. Using a trailer hitch harness with waterproof connector.

  • Like 1
Link to comment
Share on other sites

Woooooo boobies!

Yeah you put a pink color to that and you have yourself some indecent exposure in your lawn.

Link to comment
Share on other sites

Shubb,

For a baby, isn't it the same thing?

Was thinking about 3-4 feet. Using a trailer hitch harness with waterproof connector.

From what I understand about pixels that should be fine

Link to comment
Share on other sites

i cut mine and made the cable 18.5 feet long works good no lag or diming i also used 4 strand trailer wire and weather pack connectors

Edited by t purser
Link to comment
Share on other sites

You could also inject power at the start of the second arch if you find that you're having problems.

Link to comment
Share on other sites

  • The topic was locked
Guest
This topic is now closed to further replies.
×
×
  • Create New...