k6ccc Posted June 17, 2012 Share Posted June 17, 2012 Wooo Hooo!Yesterday I completed wiring the light rope in front of my 17 roses, and after it got dark, I was able to watch them work! The intent for the landscaping lights is that they will change intensity slow enough that most people will say something like "Oh yea, the lights are changing". It's supposed to be pretty subtle. It's so subtle that I had a hard time following the sequence (and I wrote it), so I think I'm going to have to step it up just a little bit. It did look nice though.Today I got the 3 down lights in the bay window on the front of the house wired so I will get to see what they look like tonight. After that I have some brick work to complete before I can light up more light.20 circuits completed - 32 to go... Link to comment Share on other sites More sharing options...
WilliamS Posted June 17, 2012 Share Posted June 17, 2012 It gets worse as time goes by. Always happy to hear its working though! Link to comment Share on other sites More sharing options...
Guest wbottomley Posted June 17, 2012 Share Posted June 17, 2012 Yea. When you get older, you can fart with the lights blinking. Link to comment Share on other sites More sharing options...
Tim Fischer Posted June 17, 2012 Share Posted June 17, 2012 wbottomley wrote: Yea. When you get older, you can fart with the lights blinking.If you can fart and make the lights blink, it's time to seek medical attention. Link to comment Share on other sites More sharing options...
Guest wbottomley Posted June 17, 2012 Share Posted June 17, 2012 Tim Fischer wrote:wbottomley wrote: Yea. When you get older, you can fart with the lights blinking.If you can fart and make the lights blink, it's time to seek medical attention.LOL :P:P Link to comment Share on other sites More sharing options...
Ken Benedict Posted June 17, 2012 Share Posted June 17, 2012 wbottomley wrote:Yea. When you get older, you can fart with the lights blinking.Maybe you can use the flatulent interface in your E1.31 network?K6CCC: is anything else planned for your architectural project? Link to comment Share on other sites More sharing options...
k6ccc Posted June 18, 2012 Author Share Posted June 18, 2012 Ken Benedict wrote: K6CCC: is anything else planned for your architectural project?Yes, as it says in my signature, I will end up with fifty something channels controlled under LOR. I have some brickwork to complete before I can add the next couple dozen channels and then some more concrete and brickwork before I can do the rest. Current timetable is early July to complete the next phase of brickwork so shortly after that some more channels will light up - I hope... Link to comment Share on other sites More sharing options...
kelly jett Posted June 18, 2012 Share Posted June 18, 2012 hey just curious. do you have any videos of the landscape lighting.i would really like to do something as well and would love to see some ideas.thanks Link to comment Share on other sites More sharing options...
k6ccc Posted June 18, 2012 Author Share Posted June 18, 2012 kelly jett wrote: hey just curious. do you have any videos of the landscape lighting.i would really like to do something as well and would love to see some ideas.thanksNo, and this point (as noted in an earlier post) it is so subtle that it would be really boring! I will be ramping it up a bit, as it is so subtle that even I could not pick up the fades at times. I also need to add the last 3 lights that were added yesterday.If you would like to chat about what I am doing and swap some ideas, feel free to send me a PM and I am more than happy to chat. Also happy to chat on phone if desired.... Link to comment Share on other sites More sharing options...
Dave H1 Posted June 18, 2012 Share Posted June 18, 2012 K6,are you using 120 or 12v LEDs?? Link to comment Share on other sites More sharing options...
plasmadrive Posted June 19, 2012 Share Posted June 19, 2012 Tim Fischer wrote: wbottomley wrote: Yea. When you get older, you can fart with the lights blinking.If you can fart and make the lights blink, it's time to seek medical attention.Or perhaps a patent! Link to comment Share on other sites More sharing options...
k6ccc Posted September 19, 2012 Author Share Posted September 19, 2012 K6,are you using 120 or 12v LEDs??It's all 12V DC Link to comment Share on other sites More sharing options...
Recommended Posts