shredocaaster Posted April 7, 2012 Share Posted April 7, 2012 Has any one done such yet? Link to comment Share on other sites More sharing options...
SteveMaris Posted April 7, 2012 Share Posted April 7, 2012 no. Link to comment Share on other sites More sharing options...
Don Posted April 8, 2012 Share Posted April 8, 2012 shredocaaster wrote: Has any one done such yet?Keep in mind that the back side of a CCR is solid. You would have to turn some of the CCR's around so that they are visible to those viewing the display. (Of course if you are in a large open area you'd have to think through how you would do that.) Link to comment Share on other sites More sharing options...
Ron Boyd Posted April 10, 2012 Share Posted April 10, 2012 http://www.shannonclaus.com/CCR%20Spiral/CCRSpiral.htmlCheck out how this was done. If you read through the construction tutorial, you'll see his were facing away from viewers but because of illuminating the tubing, you can see the light from the CCR and it's facing away. Don't know if it will work with a traditional Mega Tree setup, but it's an outstanding effect for the Spiral.You could face all CCRs forward (ie: front ones facing the outside of the tree and the rear ones facing the inside of the tree.) I think that would work. Link to comment Share on other sites More sharing options...
shredocaaster Posted June 15, 2012 Author Share Posted June 15, 2012 Dariansdad - Though different from my idea I was so wondering how your spiral trees were done. Thanks! Link to comment Share on other sites More sharing options...
james campbell Posted June 17, 2012 Share Posted June 17, 2012 shredocaaster wrote: Dariansdad - Though different from my idea I was so wondering how your spiral trees were done. Thanks!click on the link it shows how he made them Link to comment Share on other sites More sharing options...
Recommended Posts