Guest guest Posted December 30, 2006 Share Posted December 30, 2006 ok about the cords is their any ways to hook then togather to make longer than 100 feet ? our yards 180 feet..and if no does the wireless run more than 1 box? Link to comment Share on other sites More sharing options...
Guest guest Posted December 30, 2006 Share Posted December 30, 2006 ok about the cords is their any ways to hook then togather to make longer than 100 feet ? our yards 180 feet..and if no does the wireless run more than 1 box?These questions have been covered before. Please take a moment to review http://www.lorwiki.com and the LOR support page (http://www.lightorama.com/support)1) The 100ft limit only applies to the RS485 connector to the first controller. If you use the 485USB connector, you can go beyond 100 feet for the first connection. Controller to controller can up upwards of 2000ft.2) If you have 3 controllers, you would need 4 wireless devices to make it work. One at the computer, and 1 at each controller. Link to comment Share on other sites More sharing options...
Guest guest Posted December 30, 2006 Share Posted December 30, 2006 2) If you have 3 controllers, you would need 4 wireless devices to make it work. One at the computer, and 1 at each controllerThis needs clarifying. I have 3 16 channel LOR's. I run wireless from the computer to the first controller, and then from there they are connected with Cat 5 cable. You can see this in the picture below.James Link to comment Share on other sites More sharing options...
Guest guest Posted December 30, 2006 Share Posted December 30, 2006 Thanks, James.Original poster, you don't mention how far apart the boards are or anything like that. However, after looking at the LOR Support page, I think it will answer a lot of your questions. Link to comment Share on other sites More sharing options...
Guest guest Posted December 31, 2006 Share Posted December 31, 2006 bkdraft wrote: 2) If you have 3 controllers, you would need 4 wireless devices to make it work. One at the computer, and 1 at each controllerThis needs clarifying. I have 3 16 channel LOR's. I run wireless from the computer to the first controller, and then from there they are connected with Cat 5 cable. You can see this in the picture below.JamesIs the ELL weather proof? Link to comment Share on other sites More sharing options...
Recommended Posts