KHenry1319 Posted December 9, 2011 Share Posted December 9, 2011 Ok, so I started playing around this new 16 channel unit. I got everything to work fine yesterday. I tested 2 channels and they both worked to the music.However, I attempted to do the same thing this evening, but, the song plays but I am not seeing any lights flash?I tried the Hardware utility and the system lights up when I do a test. But not working when I run the Sequence Editor.What am I doing wrong??THANKS!! Link to comment Share on other sites More sharing options...
Denise Brunner Posted December 9, 2011 Share Posted December 9, 2011 In the sequence editor, under 'play' make sure 'control the lights' is checked. Link to comment Share on other sites More sharing options...
Don Posted December 9, 2011 Share Posted December 9, 2011 If you want to control the lights via the Sequence Editor, make sure the Hardware Utility is closed.You also need to make sure that "Control Lights" is checked in the "Play" menu. You should also have a blue box at the lower right of the SE, which is an indication the SE is can connect to the COM port. Link to comment Share on other sites More sharing options...
Recommended Posts