scramboy11 Posted December 3, 2011 Share Posted December 3, 2011 This is my first year using LOR. Super excited and yet apologize for my newbie-ness.I've got 6 controllers. 96 channels total.Using PC to control them for now, and can get them all to respond properly with HU.I only have 3 sequences programmed currently. When I run it, only 2 of the 6 controllers are firing lights on. All boxes are solid LED light showing that they are receiving signal.The controllers are currently plugged in the sequence 6, 4, 3, 1, 2, 5. And yet only 1 & 2 are turning lights on during sequences.1 & 2 are brand new boxes. The others are less than 3 years old but I bought them used.I'm thinking I did something incorrectly in the programming? Or is it maybe the used controllers are retaining previous information from the previous other. (I figured that less likely since I can communicate properly with the controllers when using HU)I would love any help you guys can offer. Thanks in advance.Marc Link to comment Share on other sites More sharing options...
evan.a Posted December 3, 2011 Share Posted December 3, 2011 check your sequence and make sure you have each channel assigned. next is each controller has its own unit number. Link to comment Share on other sites More sharing options...
Ken Benedict Posted December 3, 2011 Share Posted December 3, 2011 Run the verify utility and see what it shows. You may have some duplicates floating around. Link to comment Share on other sites More sharing options...
beeiilll Posted December 3, 2011 Share Posted December 3, 2011 What level of license do you have? The basic license will only support 2 controllers. Link to comment Share on other sites More sharing options...
jfelix Posted December 4, 2011 Share Posted December 4, 2011 Evan has the right idea. Double check your channel config if it is not assigned correctly you will have problems. I have been doing this for 6 years and messed up my channel config this year. Had the same problem. This is assuming you have more than a basic license. Link to comment Share on other sites More sharing options...
scramboy11 Posted December 4, 2011 Author Share Posted December 4, 2011 Thank you for the response.I feel like an idiot for 2 reasons. LOL....1. Not realizing there was a difference with the software when it is clearly written on the website. I have the basic. I'm upgrading it now. 2. Spending 6 hours in the yard yesterday trying to troubleshoot my problem by switching CAT5 cables, resetting controllers, etc.I won't be able to test the system for a few hours yet, but I am presuming that it will all run with no hiccups. I will let you know.Marcp.s. Sorry for the double post of the topic... damn newbies. Link to comment Share on other sites More sharing options...
coasterbp Posted December 5, 2011 Share Posted December 5, 2011 A little off topic, but where in Vegas are you located? I'm trying to find other Vegas displays to go see.I'm in Mountains Edge!Glad you are getting everything up and running.-=CoasterBP Link to comment Share on other sites More sharing options...
Recommended Posts