chartrand Posted December 3, 2011 Share Posted December 3, 2011 I was poking around my settings today and noticed that the Bits Per Second rate on my USB 485 adapter are set to 9600. I looked for a manual, and FAQ's to see if I should increase this to maybe 19200 for example, but was unable to find anything. What do you have yours set at? (Right click on you Comuter, choose manage. In the Management window choose Device manager from the tree and then select Ports and the USB port. Right click on it and choose properties and look on the Port settings Tab to see.ThanksPat Link to comment Share on other sites More sharing options...
cmoore60 Posted December 3, 2011 Share Posted December 3, 2011 I believe that part does not matter. The communications rate in the sequence editor is what has more effect.Chuck Link to comment Share on other sites More sharing options...
Recommended Posts