Jump to content
Light-O-Rama Forums

can 1602mp3 do multiple networks?


rickswa

Recommended Posts

Hello, I posted in another area about a problem I am having with lights "lagging" at times and then running very fast to catch back up to the music. I added 2 CCR's this year so it seems to be something with that. It was suggested to put the CCR's on a different network but I have a question about that. Is it possible to have multiple networks using the 1602MP3? I use that as my first unit to control the show and then have ctb16pc's for 5 other units and 2 CCR's. does anyone know how to setup and configure a second network on the mp3 unit? Also, if this is possible, do I have to make sure each CCR is set to the new network in the sequence editor? Thanks for any help.

Link to comment
Share on other sites

ugh. Ok. thank you for the quick reply. Would you have any suggestions to help my problem since I can't do multiple networks? It's like the CCR's take over the megatree and leaping arches at times. I have the ccr's doing a morph and the tree "spinning" then the arches should come on one by one and the tree change color, but it won't happen until the morph on the ccr's stop. that's just one example but it's in certain parts of multiple songs where the arches start running real slow, then go really fast to catch back up and then it's normal so I have to guess it's the CCR's creating the drag. is there anything else you could think of doing?

Link to comment
Share on other sites

I think I found the answer in another post. I bumped up the network speed when creating the show with the hardware utility and for some reason the compatibility mode was checked in the sequence editor. After following steps listed by someone else, it is MUCH, MUCH better. still just a hint of a lag sometimes but if you didn't know to watch for it, you really wouldn't catch it.

Thanks for the great posts and help to everyone who helps us "challenged" folks out.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...