dvarela Posted December 2, 2011 Share Posted December 2, 2011 Please help. I have 2 1602w's that are not working. I pulled them out of the box yesterday morning. I hooked up everything as I did in the past. I set the id before I powered it on. Last night, I went out to test. One new controller has a channel on all the time but the unit is showing in the software. I will try the rest today on this one. The other will not detect. so I went out to the box and no led is on, but one channel is lite all the time. Checked fuse, Checked switch, I even checked the led light. Turned the unit back to 00 to try a rest and still no led. What else am I missing? I know it is putting out power to one channel all the time. Please help. I stayed up all night making sure all connections are tight. Thank you for your time. Link to comment Share on other sites More sharing options...
dvarela Posted December 2, 2011 Author Share Posted December 2, 2011 Ok looks like the 8 pin com chip is done. Where can I pick up one really quick? Thank you lor tech support. Link to comment Share on other sites More sharing options...
Max-Paul Posted December 2, 2011 Share Posted December 2, 2011 For most sakes, this forum is not LOR Tech support. It is mostly old farts that like to share and help one and each other. Your best bet is to contract LOR directly. Link to comment Share on other sites More sharing options...
Recommended Posts