mattera68 Posted December 1, 2011 Share Posted December 1, 2011 During the show I have noticed different channels sticking on until they are turned on again then they go off. It has happened on different channels and different controllers. What causes such a thing? Link to comment Share on other sites More sharing options...
Don Posted December 1, 2011 Share Posted December 1, 2011 The first thing that jumps to mind is a channel configured twice, and then being given conflicting commands.I would run the LOR Verifier (it is in the LOR Control Panel) to make sure that isn't the case. Link to comment Share on other sites More sharing options...
MistyB Posted December 2, 2011 Share Posted December 2, 2011 I am having the same problem...It is really evident because I have channels staying on on my arches. I ran the verifier and no conflicting channels. I have double checked my sequences and they are clean... Any other ideas?ThanksMisty Link to comment Share on other sites More sharing options...
papap Posted December 2, 2011 Share Posted December 2, 2011 Having same problem with g3 controllers. I have two new boards on the way. Not happy with problems but happy with service. Mine stay on even after the show is over. Link to comment Share on other sites More sharing options...
papap Posted December 2, 2011 Share Posted December 2, 2011 Link to comment Share on other sites More sharing options...
MistyB Posted December 2, 2011 Share Posted December 2, 2011 papap...do you run the showtime director DC-MP3 with the latest firmware?...I was wondering if it might be the mp3 controller since we are v2 boards. Link to comment Share on other sites More sharing options...
Recommended Posts