mike228 Posted December 1, 2011 Share Posted December 1, 2011 need a little help this is my first year using Lor . Im using 2 lor controllers, for some reason controller #2 shut off during my display and the lights remain static until i disconnect and reconnect the plug. Each plug is running through separate outlets so i didnt think it was a power issue. Any help would be appreciated. Link to comment Share on other sites More sharing options...
CooBeans Posted December 1, 2011 Share Posted December 1, 2011 Separate outlets, or separate circuits? Big difference if the controllers are on the same circuits you may have a problem. Link to comment Share on other sites More sharing options...
mike228 Posted December 1, 2011 Author Share Posted December 1, 2011 Definitely sure they are on two separate circuits I will have to check the other 2 thank you Link to comment Share on other sites More sharing options...
-klb- Posted December 1, 2011 Share Posted December 1, 2011 Only one side powers the logic. If that side is experiencing some sort of voltage drop, or noise that is causing the processor to lock, you would wind up with some lights on, some off, and none in between... Do you have adequate gauge cable for the current and distance you are running? Link to comment Share on other sites More sharing options...
Recommended Posts