Jump to content

Enable show


drivemewilder
 Share

Recommended Posts

First year running a show from my pc. I've gone into the simple show builder, and true to it's title....it is very easy to build a show. I've clicked on the red bulb, enable show, the bulb turns blue...but my show won't come on. Nor am i able to "disable show" as it seems to just freeze up and i'm forced to unplug the pc and do a total re-boot. My show is set to come on at 5:30, and i start the re-boot about 5:40 and by the time it comes back to life i'm looking at 5:50ish. The lights USUALLY kick right on, but the other day the music started playing and the lights were dead for 3 minutes of the first sequence. As of now, there's no way i'm comfortable not being at home when the lights are scheduled to come on b/c i know they won't come on.


ipb.global.registerReputation( 'rep_post_569332', { domLikeStripId: 'like_post_569332', app: 'forums', type: 'pid', typeid: '569332' }, parseInt('') );

Link to comment
Share on other sites

My first thought is to try a complete uninstall and then re-install LOR. I'd also look for other programs that might be interfering - especially anti-virus programs. Check for anything that updates automatically. You say nothing of your PC. Does it have enough RAM?
What version of LOR are you using?

Link to comment
Share on other sites

I say nothing of my pc, b/c i would look foolish. Ha, i'm computer stupid. I know just enough to be dangerous. I can follow instruction like noone's business, surf the net with the best of em, sequence a bulb or two, but i don't know anything about pc's. I can look into anti-virus programs, or anything else that might be in the way. I was under the impression that as long as my computer was powered up...and LOR was enabled...that my show would start right on time. It works as soon as i do a re-boot, but not before.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...