Jump to content

Hardware Utility


imposterbond
 Share

Recommended Posts

I have just received a new ctb16pcg3 card and want to assign a new id to it.In hardware utility it does not recognized the card - it says found 1 unit unknown device. I cant seem to find where to download an up to date hardware utility for v2.9.4 so it will recognize this card type(I am assuming this is the problem as I have a solid led).Can some kind person point me in the right direction.
TY
Mark

Link to comment
Share on other sites

Version 2.9.4 will never recognise the board as anything other than "unknown", due to the board type being newer than the software. I believe that the new Version 3.x software will recognise it correctly. However, this should not be a problem, and you should still be able to set the new address.

Regards,

Alan.

Link to comment
Share on other sites

It should do. There is a lookup table in the software that converts the code sent by the board into the "type number" that the hardware utility puts on the screen. The 2.x software versions will not recognise the code returned by a generation 3 board. Apart from this, everything else should work correctly.

Regards,

Alan.

Link to comment
Share on other sites

 Share

×
×
  • Create New...