jbitzer Posted November 25, 2011 Share Posted November 25, 2011 I hope this is not a 'dumb' question but have several CTB16PC controllers in their own enclosure and set the unit ID's 01, 02, 03, etc.Recently I have seen several posts with photos with titles such as '64 channel controller' which have multiple boards in a single enclosure. Also have seen in the channel property grid it is possible to add an LOR controller with more than 16 channels.My question (or need for clarification) is this: Is there a different way of assigning more than 16 channels than the way I have been doing by assigning a unit ID to each 16 channel board or if I have multiple controllers (such as 4 ) can they be added as a single 64 channel unit?I want to make sure I am not missing something here! Link to comment Share on other sites More sharing options...
Denise Brunner Posted November 25, 2011 Share Posted November 25, 2011 They need to be addressed as individual 16 channel controllers. No short cut that I know of.I have two of those 64 channel controllers out there working Link to comment Share on other sites More sharing options...
JBullard Posted November 26, 2011 Share Posted November 26, 2011 I have 5 16 channel boards in one case for my megatree Link to comment Share on other sites More sharing options...
Recommended Posts