fordsbyjay Posted November 23, 2011 Posted November 23, 2011 This summer I had a hard drive failure so I have reloaded the latest version of LOR. When I tried to install the driver for my USB adapter I can't seem to get communication with my LOR boards.The previous driver I had was CDM_2.02.04. I installed this driver and it said it installed and was ready to use. After a reboot I can not see any controllers so I upgraded to the latest version (2.08). Once again in my device manager it says it is working properly but I have no communication with my boards.One thing I noticed different from the instructions is in the device manager it doesn't show anything about a com port.Can anyone see what I am doing wrong? Wrong driver?
fordsbyjay Posted November 23, 2011 Author Posted November 23, 2011 I forgot to mention I have 4-CTB-16D boards and the USB-RS485 adapter.
fordsbyjay Posted November 23, 2011 Author Posted November 23, 2011 Ok I got it. Man getting old sucks. I had the wrong network cable plugged in. The one I use is dark blue and there is a dark green one that I grabbed from under the desk.
ItsMeBobO Posted November 23, 2011 Posted November 23, 2011 Look at device manager for USB Serial PortI am using three this year. 7,9,10. Com4 is for RDS.
Recommended Posts