ed26105 Posted November 7, 2011 Posted November 7, 2011 I have several LOR1602W boxes and haven't had much problem. I have a group of version 4.01 which have worked well for three or four years. One box no longer connects to the network. I tried a hard reset - set to 00 and turn on for several minutes - but the LED simply blinks and will never burn solid. Are there any other tricks? Is this repairable? Tried searching this forum with keywords but can't find any reference to this problem.
Guest wbottomley Posted November 7, 2011 Posted November 7, 2011 Either a bad data cable or the rj45 connector is bad.
ed26105 Posted November 7, 2011 Author Posted November 7, 2011 Tried multiple cables, other boxes connected but this one didn't. RJ45 connector in the box? Tried both connectors on box, neither worked. (I have another box where the middle connector is bad so it must be used as the end of the daisy chain.)
-klb- Posted November 7, 2011 Posted November 7, 2011 The 8 pin com chip sometimes fails. You could test by swapping with another board.
Recommended Posts