Waterfall lights

[DoctorZee]

I bought some waterfall lights from Winterland and they have their own controllers. Can I work those into my LOR controller or am I limited by a possible conflict of controllers?

[Guest guest]

You can actually use any lights that have their own controller with a LOR Controller, the only thing is you have to use them with 100% ON ONLY in the sequence.

I use several types of lights that have their own controller and use them with CTB16PC controllers, I just program them to be steady on at 100% and off.

So they can be used, you may have to turn them on a few seconds prior to the actual area you want them to be on so they come up and are operating as the event occurs, then turn them off where you want them to end.

You don't want to use anything less than 100% ON as damage could possibly occur to the lights own controller, plus they may not work, so no twinkle, shimmers of fades should ever be used with a light set that has it's own controller system.

Hope this helps.

[kelly jett]

orville,
just a quick question...i know i've read it in the forums somewhere but for the life of me i can't find it.

in my channel configuration i have two channels that are set-up for strobe lights.

how do you set them to be steady on at 100% and off to be the only options.

i guess i just haven't poked around enough.

thanks

[DoctorZee]

Thanks Orville, that helps me with that problem and explains a couple of others I had with blinking icicle lights in the past.

[TJ Hvasta]

Kelly, AFAIK, for curtain strobes.. On/Off are the only options.. fade/twinkle/shimmer.. Bad... On/Off.. Good.

(and yes, that's "curtain", not "certain"..)