Adding another Controller

[Rickbj]

I have my second controller on order (and hope to get it soon). While I am waiting, I made copies of my sequences and renamed them. I want to expand the renamed sequences from 16 channels to 32 channels for the second controller but I can't figure out how to add the additional 16 channels to the sequence. I tried a search, no luck. I tried the instructions, could not find it. Any help?

Thanks,

Rick

[hcl1]

Right click on the channel bar on the left and click insert device - insert device below



Then choose the type of controller that you ordered then copy and paste your sequence into place


Attached files

[-klb-]

Right click on your last channel button. Insert Device -> Insert device below. Select CTB 16 channel controller.

[Randy]

There's lots of ways to skin the cat, Rick...Here are some suggestions:

* Go to the last channel on the bottom and right click on the title (on the left side).
* Add 16 channels "Below" that channel (each channel will be labeled"new channel" on left side).
* Fill in the new 16 channels with name, color, and channel assignment.
* When done adding all of that data, export your new 32 channel configuration (use Edit menu pulldown).
* Open up each of your previous 16 channel sequences, right click on last channel, add 16 channels below that, and then import your new 32 channel configuration.
* Complete sequencing/programming for each of the new 16 channels at the bottom (it could be new or you can copy rows from above).
* After each sequence is modified, save it, exit, and go to the next sequence until they are all done...

Now all of your sequences are 32 channels...

Randy

[Rickbj]

Wonderful. It worked. I should have asked several hours ago. Really appreciate your answer. Now, if you have any pull with Dan, I sure could use that new controller

Rick