ljb2of3 Posted October 19, 2011 Share Posted October 19, 2011 Hi all,I'm planning to buy a couple of CTB16PC dimmers to add to my existing display. Everything else is already DMX controlled, so I just need basic DMX control. Does the CTB16PC support DMX control?What do I need to configure them? I see they don't have unit ID switches built in. Do I have to buy the ShowTime software just to configure them?Thanks,Landy Link to comment Share on other sites More sharing options...
-klb- Posted October 19, 2011 Share Posted October 19, 2011 You need one of the RS-485 adapters. It will come with a version of the hardware utility that can set the unit ID for you. I think the hardware utility included in S2 or S3 has a functional hardware utility even at the unlicensed demo level. Link to comment Share on other sites More sharing options...
ljb2of3 Posted October 19, 2011 Author Share Posted October 19, 2011 Good to know, thanks. Does it also support DMX? The only difference I see is that the PC version doesn't do standalone mode, which I don't need anyways. Link to comment Share on other sites More sharing options...
edvas69 Posted October 19, 2011 Share Posted October 19, 2011 If your wanting to run your LOR controller in a DMX universe, here is a presentation I created that will give you all the info you need to set it up.http://dl.dropbox.com/u/25894067/Running%20LOR%20Controllers%20%20in%20DMX%20mode.ppsx Link to comment Share on other sites More sharing options...
ljb2of3 Posted October 20, 2011 Author Share Posted October 20, 2011 edvas69 wrote: If your wanting to run your LOR controller in a DMX universe, here is a presentation I created that will give you all the info you need to set it up.http://dl.dropbox.com/u/25894067/Running%20LOR%20Controllers%20%20in%20DMX%20mode.ppsxThank you! The list of supported hardware and the pinout for adapters was very useful! Link to comment Share on other sites More sharing options...
Recommended Posts