WiggyHD Posted October 2, 2011 Share Posted October 2, 2011 Does the sequence have to be finished and saved in a certain way for the controller to run the lights? I finished building the controller today, and ran the test page with all 16 channels having lights plugged in. The usb adapter is hooked to the computer and into the controller via the ethernet cable that came with it. The status box says Light O Rama 2.9.4 is currently Disabled. What? I just ran tests and it was doing what I told it to do! All I want to do is see what I have sequenced to music so far.THANKS!Mark Link to comment Share on other sites More sharing options...
james campbell Posted October 2, 2011 Share Posted October 2, 2011 WiggyHD wrote: Does the sequence have to be finished and saved in a certain way for the controller to run the lights? I finished building the controller today, and ran the test page with all 16 channels having lights plugged in. The usb adapter is hooked to the computer and into the controller via the ethernet cable that came with it.The status box says Light O Rama 2.9.4 is currently Disabled. What? I just ran tests and it was doing what I told it to do! All I want to do is see what I have sequenced to music so far.THANKS!Markmkae sure in the seqeunce page,the control ;lights box is checkedit's under the play tab Link to comment Share on other sites More sharing options...
Guest wbottomley Posted October 2, 2011 Share Posted October 2, 2011 WiggyHD wrote:Does the sequence have to be finished and saved in a certain way for the controller to run the lights? I finished building the controller today, and ran the test page with all 16 channels having lights plugged in. The usb adapter is hooked to the computer and into the controller via the ethernet cable that came with it. The status box says Light O Rama 2.9.4 is currently Disabled. What? I just ran tests and it was doing what I told it to do! All I want to do is see what I have sequenced to music so far.THANKS!MarkHere's the breakdown....in the sequencer, make sure your channel config is set for your controllers. After that task is complete, you can play a show two different ways.Go to the show editor and create a show. Make sure it's saved.Right click on the bulb in the task bar and use show on demand. Select show then play.The other way is scheduled. To schedule a show... here's the manual: http://www.lightorama.com/downloads/2.9.4/LORHelp.pdf Link to comment Share on other sites More sharing options...
WiggyHD Posted October 2, 2011 Author Share Posted October 2, 2011 Nevermind. I closed it out and logged back into what I had saved. It worked.Mark Link to comment Share on other sites More sharing options...
Don Posted October 2, 2011 Share Posted October 2, 2011 WiggyHD wrote: The status box says Light O Rama 2.9.4 is currently Disabled.When you have the "LOR Control Panel" running, that message will appear in the status box when shows are disabled from running. If you'll right click that LOR icon in your status bar, you will see "Enable Shows" and "Disable Shows" Link to comment Share on other sites More sharing options...
WiggyHD Posted October 2, 2011 Author Share Posted October 2, 2011 Thanks all! I've only been on this for three days. I spent two hours making 30 seconds worth of music/light sequencing to one of my kids favorite song. Tested the board, called in the kids and my wife, pushed play....nothing. Embarassed, I go through every button on the control panel, got frustrated, closed the program, opened it back up, opened saved sequence, pushed play, yelled HE&& Yeah! Girls came runnin' and gave me hugs for a 30 second show. Wow!Mark Link to comment Share on other sites More sharing options...
CKSedg Posted October 2, 2011 Share Posted October 2, 2011 Wahooooooooooooooooooo for you! It's exciting, isn't it? Now you're hooked. Link to comment Share on other sites More sharing options...
Recommended Posts