Kevin Leuenberger Posted September 25, 2011 Share Posted September 25, 2011 I would like to see if anyone else has had this issue, (or did I really screw this up)......Just finished building my first Rainbow Flood from Greg (Ponddude), like the concept, excited to get it in my yard. After I finished the build, hooked it up to the cm16, ran hardware utility, selected all on, and...nothing. Took out the DMM, confirmed voltage to the rainbow flood. Took the cm16 out of the loop, and connected the flood directly to the 12v source, still nothing. Flood has the new high output LEDs, and I am uncertain of what voltages off of which legs of the LEDs I should be getting. Can anyone help with this? ThanksKevinGreg- sent you an email through your site, but the redirect didn't seem to be working, so I thought I'd crowd source the troubleshooting........ Link to comment Share on other sites More sharing options...
Kevin Leuenberger Posted September 25, 2011 Author Share Posted September 25, 2011 Shortest troubleshoot post in history. As soon as I had posted, Greg had already sent me an email. I had the com port connected to -12v, instead of +12v. Hours spent and it was right there in front of me......Thanks again to Greg, great customer service!Kevin Link to comment Share on other sites More sharing options...
Recommended Posts