khawes Posted September 5, 2011 Share Posted September 5, 2011 The EDM-LCD-RDS-EP has this in in it's description:RF adjustable (1-10mW and 2-100mW)Does that mean you can choose between 10mw and 100mw or that it is adjustable between 1 and 10 or 2 and 100?Yea, I'm dense that way. Link to comment Share on other sites More sharing options...
marquisite Posted September 6, 2011 Share Posted September 6, 2011 There is a mode selector switch that toggles between "low power" (1-10mW) and "high power" (2-100mW). Next to the output power switch is a component that sticks up that you turn with a flat head screw driver left or right. Clockwise increases the mW power, anti-clockwise decreases the power.So with the component set to the most left it will go, your transmitter will operate at 1mW in low power or 2mW in high power mode. If the component was rotated as far right as it will go, your transmitter will operate at 10mW in low power mode or 100mW in high power mode.If the dial is somewhere between the left and right position, then the power of your transmitter will be somewhere between 2-9mW in low power mode, or 3-99mW in high power mode.Hope that makes sense! Link to comment Share on other sites More sharing options...
khawes Posted September 6, 2011 Author Share Posted September 6, 2011 Perfect sense.Thank you. Link to comment Share on other sites More sharing options...
taybrynn Posted September 6, 2011 Share Posted September 6, 2011 And I think most of the time, they ship preset to 10mW ... and on the 1-10 (red) switch setting. The baby blue dial is the power range adjustment with the range selected. Link to comment Share on other sites More sharing options...
Recommended Posts