paulanator Posted August 7, 2011 Share Posted August 7, 2011 Just a quick question for you RGB experts. This is my first year using the spots and floods and I was wondering if you can span from one side of the DC board to the other.For example, channel 8, 9, 10 on one RGB device. I would not think it matters as long as both sides have power, but I wanted to make sure.I have channel 1 being used, so the RGBs fall where Channel 8 is left, then 9 and 10 on the other side of the board, and I would like to use all the channels. Link to comment Share on other sites More sharing options...
rescue_653 Posted August 7, 2011 Share Posted August 7, 2011 As you said as long as both sides are powered at the same voltage there will not be any problems at all. Link to comment Share on other sites More sharing options...
mnkyboy Posted August 7, 2011 Share Posted August 7, 2011 paulanator wrote:Just a quick question for you RGB experts. This is my first year using the spots and floods and I was wondering if you can span from one side of the DC board to the other.For example, channel 8, 9, 10 on one RGB device. I would not think it matters as long as both sides have power, but I wanted to make sure.I have channel 1 being used, so the RGBs fall where Channel 8 is left, then 9 and 10 on the other side of the board, and I would like to use all the channels. This LOR DC card is wired with Channels 7,8 and 9 running sets of RGB ribbon. Works perfectly. Link to comment Share on other sites More sharing options...
paulanator Posted August 7, 2011 Author Share Posted August 7, 2011 Super, thanks guys for the help.I am having a blast sequencing with the RGB additions to my display. Link to comment Share on other sites More sharing options...
Steven Posted August 9, 2011 Share Posted August 9, 2011 rescue_653 wrote: As you said as long as both sides are powered at the same voltage there will not be any problems at all.It's probably moot, but not only do both sides need the same voltage, but they need to be hooked up to one power supply. The reason is that the positive is common, but the DC board has a common negative for the two sides. Link to comment Share on other sites More sharing options...
paulanator Posted August 9, 2011 Author Share Posted August 9, 2011 Good point, thanks Steven! Link to comment Share on other sites More sharing options...
Recommended Posts