Jump to content

Scheduling Shows with the LOR1602MP3


Guest guest
 Share

Recommended Posts

I am running a 32 channel setup using one LOR1602MP3 with one LOR1602W. Is it possible to program a show schedule with this setup? Will the show on the memory card simply repeat for as long as power is applied? Is it necessary to use a timer with this setup? Thanks!

Link to comment
Share on other sites

comicemp wrote:

I am running a 32 channel setup using one LOR1602MP3 with one LOR1602W. Is it possible to program a show schedule with this setup? Will the show on the memory card simply repeat for as long as power is applied? Is it necessary to use a timer with this setup? Thanks!

Yes, it is possible, and very easy. Assuming that you have the two units connected, and that you have programmed for 32 channels .... they will both operate when you want them to.

As of right now, there is no scheduler for the MP3 director, which you have. Instead, it will run whenever power is applied. It will repeat until power is removed.

Timer: Dan (from LOR) has mentioned the firmware will be out soon that will allow for scheduling. When this happens you will not need a timer. Otherwise, you would need a timer if you wanted a complete hands off solution.
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...