nmonkman Posted December 28, 2010 Share Posted December 28, 2010 All of a sudden one of the channels for my arches stays on 24/7 and appears to be at only 50%.Anyone seen this before?My wife noticed it and I shut all the controllers down and then repowered them. The channel went off and stayed off until the show started and now it is back on again. Link to comment Share on other sites More sharing options...
George Simmons Posted December 28, 2010 Share Posted December 28, 2010 Neil - have you tried resetting the controller? Link to comment Share on other sites More sharing options...
nmonkman Posted December 29, 2010 Author Share Posted December 29, 2010 No, I only powered it on and off.I am not sure how to reset it. Link to comment Share on other sites More sharing options...
George Simmons Posted December 29, 2010 Share Posted December 29, 2010 What type of controller is it? Link to comment Share on other sites More sharing options...
nmonkman Posted December 29, 2010 Author Share Posted December 29, 2010 Blue Board kit 16 channel Link to comment Share on other sites More sharing options...
JBullard Posted December 29, 2010 Share Posted December 29, 2010 To reset the 1600 series Blue Board:Remove powerTurn the dials to 00Reapply power for approx 10 secsRemove powerReset the dials to the correct ID numberReapply powerIf this doesn't solve it, then it sounds like a blown triac stuck halfway. Link to comment Share on other sites More sharing options...
nmonkman Posted December 29, 2010 Author Share Posted December 29, 2010 okay, thanks!!!I will give that a try. Only two more nights left so may be just to be sure I will check it later.I would rather have one channel on the arch on at 50% than none on. Link to comment Share on other sites More sharing options...
Recommended Posts