NEW and a little lost

[joshsjams]

I am really new to this I have some questions.

I started setting my light show up late so I am struggling to get this done. I have 8 channels done.

I have a 16 channel I am useing all LED lights.

My first question is:

when I run a schedule for certain times at 9:00 I want it to shut off. ALL lights and sound. BUT it seems the lights are still blinking all night and day. HELP!!

2nd I bought the Musical Sequence packages (1 and 2). I really want more for this year but no time to make them. I am wondering if there are other places to get Pre-made sequences?

3rd If I don't get all 16 channels done should I just use 1-8 or will that not work?

Thanks in advance!!!!!

I love reading all about what your all doing and the videos are awesome.

I think I might be addicted!

[HowardShank]

joshsjams wrote:

I am really new to this I have some questions.

I started setting my light show up late so I am struggling to get this done. I have 8 channels done.

I have a 16 channel I am useing all LED lights.

My first question is:

when I run a schedule for certain times at 9:00 I want it to shut off. ALL lights and sound. BUT it seems the lights are still blinking all night and day. HELP!!

2nd I bought the Musical Sequence packages (1 and 2). I really want more for this year but no time to make them. I am wondering if there are other places to get Pre-made sequences?

3rd If I don't get all 16 channels done should I just use 1-8 or will that not work?

Thanks in advance!!!!!

I love reading all about what your all doing and the videos are awesome.

I think I might be addicted!

Congratulations on joining the addictive world of LOR!

1. Not sure why if you are using the scheduler they are not turning off. When you created a schedule, did you set the day/time of show correctly?

2. Lots of sources for sequences:
People share on the forums here.
LOR Sequences - http://lightoramasequences.com/

3. Yes... Well, most of the time. The blinky patterns may be off if they are specifically made for more channels, but it would not prevent the channels you have from working. Caveat to this is, if the sequence controller ID's are not set the same then the sequence needs to be changed to support the same controller ID's.