ckjhill Posted December 1, 2010 Share Posted December 1, 2010 I'm unsure of the replacement part for this one. I broke one end off of the C1 10uf ceramic capacitor. Tech support said I could use a 1uf tantalum capacitor. Radio shack has the 10uf tantalum capacitor 16wvdc max or 0.1uf ceramic- capacitor 50wvdc max high k dielectric. Which one can I use for a replacement? On the assembly manual it says that C1 is a 10uf 50V 10% ceramic capacitor. Thank You Link to comment Share on other sites More sharing options...
greenie95125 Posted December 1, 2010 Share Posted December 1, 2010 ckjhill wrote: I'm unsure of the replacement part for this one. I broke one end off of the C1 10uf ceramic capacitor. Tech support said I could use a 1uf tantalum capacitor. Radio shack has the 10uf tantalum capacitor 16wvdc max or 0.1uf ceramic- capacitor 50wvdc max high k dielectric. Which one can I use for a replacement? On the assembly manual it says that C1 is a 10uf 50V 10% ceramic capacitor. Thank YouYou can use this part from Radio Shack:10µF 16V 20% Dipped Tantalum CapacitorModel: 272-1436 | Catalog #: 272-1436This cap is polarity sensitive and will have a mark on the positive side. There will be a mark on the board for the positive side which is towards the Status LED. There is also a 1uF Tantalum that you can use if the 10uF is not available, which is also polarity sensitive.--Mike Link to comment Share on other sites More sharing options...
ckjhill Posted December 2, 2010 Author Share Posted December 2, 2010 Thanks a million!!!! Link to comment Share on other sites More sharing options...
greenie95125 Posted December 2, 2010 Share Posted December 2, 2010 ckjhill wrote: Thanks a million!!!!No problem! We don't want a < $2.00 part to hold up the Christmas display!--Mike Link to comment Share on other sites More sharing options...
Recommended Posts