Jump to content
Light-O-Rama Forums

status leds for ctb16pc


Recommended Posts

I'm having trouble with one of my controllers. Earlier the status led would blink normally for 7 to 8 seconds, and then solid on for 7 to 8 seconds and repeat.

Now after fiddling, it is steady on with a blink every 3 seconds.

Link to comment
Share on other sites

Have you tried resetting the controller?

Power off

Remove the jumper from the header

Power on for about 10 seconds

Power off.

Replace the jumper on the header.

Power on

If this doesn't work, it may be a bad comm chip, contact LOR and have one sent to you.

Link to comment
Share on other sites

This topic is now closed to further replies.
  • Create New...